Taidea srovnávací abrasive diamond tool

Product detailed description

Compare diamond grinding tool for comparing an already pierced stone. With two grits of 220 and 360 grit, it will align your grinding stone back to a usable flatness.

Suitable more for comparison in the width of the stone (e.g. when you need to flatten the stone for plane grinding chisels, planer handcuffs, etc.)

Also ideal for refreshing the pores on the surface of the grinding stone after clogging with metal after grinding. Thus, to make the stone work again along its entire length.

Easy to use mouse-shaped shape. The top is equipped with a spirit level, for more precise surface correction of the grinding stone

Instructions for use:
Place the stone to be leveled in water for about 3-5 min to soak up the water. Under constant moisture, grind the levelling stone unevenly over the entire surface until level. Do not apply pressure to the diamond grader, as you could break off the grinding grain.

For easy visibility of where the stone is already leveled and where it is not, we recommend marking the area in several places with a pencil. You can easily see the alignment by making the pencil strokes disappear over the entire surface of the stone.

The aligner can also be used to refresh the surface of a grinding stone clogged with metal. The grinding stone, i.e. the one to be flattened, must always be sufficiently moistened.